Manufacturer: United
*REBUILT in 1995 has not been used since.
Description/Function of unit
Service require
Electrical - 440 Volt, 3 phase, 60 cycle, 75 KVA (approx) full load operation
Water - 15 GPM, 90ºF
Air - Shop air, 30 SCFM required, 90 PSI
Service Connections
Description, Size, Location
Reservoir drain, ¾”, Left side of stand
Waste water outlet, 1¼”, Left rear of stand
Cooling water inlet, 1¼”, Left rear of stand
Air supply, 3/8”, Left rear of stand
Electrical power inlet, 1¼”, Right rear of stand
Capacities and Ranges
Reservoir- 50 gallons
Flowmeter bank- 3 stage 0.05-34.5 GPM calibrated at 125ºF, plus or minus 1% full scale
Main pump- hydraulic variable volume, hand wheel control pressure compensated;
30 GPM, 3000 PSI @ 1800 RPM, 27 GPM, 3700 PSI @ 1800 RPM, 20 GPM, 5000 PSI @ 1800 RPM
Boost pump- 30 GPM, 60 PSI @ 1800 RPM
Auxiliary pump- 5 GPM, 100 PSIG @ 1800 RPM
Air operated hydraulic pimp up to 10,000 PSIG @ 100 PSIG air pressure, discharge volume 65 cu. In per minute at 10,000 PSIG
Motor- main pump 440 volt, 3 phase, 60 cycle, 1800 RPM, 75 HP
Motor- boost pump 440 volt, 3 phase, 60 cycle, 18000 RPM, 5 HP
Motor- Auxiliary pump 440 volt, 3 phase, 60 cycle, 1800 RPM, ½ HP
All stainless steel cabinet stand can be used to test: Actuators, valves, controls, pumps, hoses, fuses, and related hydraulic components
You will need to add or purchase a vari-drive to act as the test pump prime mover.